The SmartBurn device is simple, easy to setup and use! Simply place SmartBurn on an elevated firebrick in the base of your appliance and that’s it!
To keep things simple, follow these further instructions regarding installation and configuration;
Place the SmartBurn device flat and level in the front corner of the firebox on a firebrick. This ensures the product can "breathe" and keeps the tubes ingredients in the casing. A small scattering of ash between the firebrick and SmartBurn is also highly recommended as this creates a "bed" for the device to nestle into. If using 2 SmartBurns place them on opposite sides of the heater at each front corner.
Two SmartBurns will be more effective in medium to large heaters (over 18sq, over 180m2 heating area over 18kW or over 1800sq ft). This extra SmartBurn is needed to cope with the increased wood load and heater space. Two SmartBurns will also be more effective in situations where you have a bend in your flue or chimney, a long flue or chimney as in a two storey house or considerable existing creosote buildup in the chimney. Each SmartBurn should last up to 3 months.
Place the SmartBurns level on top of the grate at opposite ends of the grate. By keeping the SmartBurns level the ingredients remain in the casing.
If the grate on your open fire doesn’t allow for the SmartBurns to be kept level, place them under the grate towards the middle of the fire.
Two SmartBurn units are recommended to cope with the increased wood load, heater space and open heating environment unique to open fireplaces.
Each SmartBurn should last up to 3 months. .
Sit SmartBurn in the “ash pan” compartment, on a small brick to prevent the ends from being covered in ash.
It is not recommended that the SmartBurn be placed inside the fire as the higher temperatures generated in this style of stove will prematurely exhaust the ingredients.
Only one SmartBurn unit is needed
Each SmartBurn should last up to 3 months.